Please take a moment to read this check list before ordering a kiln. It may save you extra trips to the dealer and other complications.
Is your dealer knowledgeable about firing? This may be more important than finding the most competitive price.
Can the dealer perform warranty repair? If not, you may have to do any warranty work yourself or send the kiln to the factory. Especially if you buy the kiln over the Internet, find out how the dealer handles warranty.
Do you have a covered, well ventilated location for the kiln, protected from the weather? Is the area free of flammable materials?
Is the kiln room large enough? You will need 12″ of additional clearance on all sides of the kiln during operation. We do not recommend small enclosed rooms such as closets.
Will the kiln fit through the doorway? Measure to be sure. (Passage clearance needed for large kilns is listed on pages 24 – 27 of the downloadable Paragon catalog. Or feel free to call 800-876-4328 to verify.)
Are you sure about voltage and electrical phase? 240 and 208 volt outlets cause confusion because they look the same. Check with your power company if in doubt.
Will you need special wiring? Figure this into your budget.
Please read the freight tips below to ensure that the delivery of your Paragon kiln is as smooth as possible. We greatly appreciate you as a customer and want you to be 100% satisfied with your kiln purchase.
Shipments to residential areas usually require a lift gate, which is a motorized tailgate that lowers the kiln to your driveway, because most houses do not have high docks. You must request the lift gate when you order the kiln so that this can be notated on the bill of lading. There will be a redelivery charge that will be billed in addition to your invoice if the lift gate is not notated on the bill of lading.
Will you need help unloading the kiln upon delivery? You have options!
Just make sure you have enough people/equipment to help unload the kiln. Please understand that inside delivery does not include uncrating and setting up the kiln.
Do you live where a large 18-wheel tractor trailer would have difficulty maneuvering? (Examples: gravel roads, narrow or steep roads, dead-end streets, sharp turns, power lines that are too low for a truck to get through.) Notifying the trucking company of this in advance will prevent extra costs and difficulties.
There are several options for delivery to a difficult location:
Most trucking companies will deliver a crate only to the curb or the front of your driveway. This is because an 18-wheeler cannot go up your driveway unless you have a commercial location that accepts trucks. It is the customer’s responsibility to move the crate into the desired location. Most companies offer inside delivery, as stated above. With a little kindness and monetary appreciation, the driver may place the crate closer to your desired location.
We pack all our kilns for truck shipment in carrier-approved crates. We ship thousands of kilns a year and only a small percentage are damaged in transit. As with all factories, our terms of sale are F.O.B. (freight on board) shipping point, meaning that title to these goods passes to you when the carrier receives the goods at our plant. Here are some tips on how to receive freight shipments:
Document the damage on the delivery paperwork. Note even small damage to the crate or cardboard, such as torn paper, crinkled cardboard, or loose banding. Have the driver give you a copy. Have him sign it. Take pictures. Open the crate or box as soon as possible and inspect the contents.
Refuse the shipment. Note or have the driver note the nature and extent of damage on the delivery paperwork. Get a copy of the paperwork. Take pictures of the damaged crate or box and contents.
If damage to contents is found upon opening, notify your distributor and/or carrier immediately. The carrier must be notified within 5 days of receipt. Leave the damaged goods in the original shipping container. THIS IS ESSENTIAL! Keep all packing materials. Take pictures of the crate and damaged contents.
Have the carrier arrange for an inspection of the goods. Write down the name of the person you speak to and the time and date of your phone call. After the inspection, file a claim as quickly as possible. You will need these documents to file the freight claim:
Thank you very much for your business! If you have any questions about freight, please contact us.
Subscribe for helpful hints on operating and maintaining your electric kiln.
There is nothing to worry about when this warning appears.
To proceed, simply choose the “Advanced” button then click the Proceed to 20.22.63.199:83 (unsafe) link.